Customization: | Available |
---|---|
Sample: | Free Sample |
MOQ: | 5000m² |
Still deciding? Get samples of $ !
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
PET siliconized release liner is a type of film that is used as a backing material in the production of pressure-sensitive labels, tapes, and adhesive products. It is made from polyethylene terephthalate (PET), a strong and durable plastic, and is coated with a thin layer of silicone to provide a release surface.
The silicone coating on the PET release liner allows the adhesive on the label or tape to be easily removed from the backing material when applied to a surface. This makes it easier to apply and remove the label or tape without leaving any residue behind. PET siliconized release liner is commonly used as a carrier film in pressure sensitive labels, tapes and adhesive products.
Product Parameters
Thickness (Micron) | Width (MM) | Length (M) |
20 ~ 50 (Typical thickness: 23, 30, 36, 50) | 500 ~ 2500 (Regular: 1090, 1550) | 6000 ~ 12000 |
Types: single side coated, both sides coated, high transparency, etc.
PROPERTY | TEST METHOD | UNIT | TYPICAL VALUE |
Thickness | ASTM D 374 | micron | 23 |
Haze | ASTM D 1003 | % | 2.5 |
Transmittance | ASTM D 1003 | % | 92 |
Gloss (45°) | ASTM D 2457 | % | 85 / 90 |
Heat Shrinkage (MD/TD) | BMS TT 0.2 (150ºC, 30min) | % | 1.5 / 0 |
Tensile Strength (MD/TD) | ASTM D 882 | MPa | 230 / 240 |
Release Force | TESA 7475 TAPE (30cm/min, 180°) |
g/inch | 18~28 |
Residual Rate | NITTO 31B TAPE | % | 90 |
Remarks: The above values of the properties obtained in our laboratory test. These values are for informative purpose and not in guarantee or warranty in any specific conditions. Users are advised to conduct their own testing to determine product suitability to use.
* Inline coating of water-based silicone to reduce cost
* High stability of release force
* Various thickness available
* Good residual rate
* Dimensional stability
* Excellent surface flatness
* Good cleanness and stiffness
Q1. What information should I let you know if I need to get a quotation?
A. Material
B. Specifications (thickness, width, length)
C. Application (Used for labels / tapes / packaging)
D. Shipping terms
E. Order quantity and frequency
Q2. What is the MOQ (minimum order quantity)?
Generally, the MOQ is 1 ton or 10,000 square meters, depending on different products.
Q3. Is it okay to provide samples?
Yes, of course it's ok for us to provide samples for your testing.
If you need, please feel free to contact us at any time.
Q4. What about the lead time for mass production?
Generally, 15~30 days after receiving the advance payment, depending on different products and the production schedule.